|
|
Autosupport Configuration
For Quotes, Please send complete log to zpa@zerowait.com
|
- How to configure autosupport
- 1. Connect to the filer via telnet, ssh or through the
console.
- 2. Enter the following commands:
- Kick Off Autosupport
- 1. Connect to the filer via telnet, ssh or through the
console.
- 2. Enter the following commands:
- Turn Off Autosupports to NetApp
- 1. Connect to the filer via telnet, ssh or through the
console.
- 2. Enter the following commands:
- Get Quote for Support on Filer
- 1. Send an email to ZPA@zerowait.com with the output from the following command:
- 2. In the same or separate email, please provide your contact information and filer name(s) so we can better identify the logs when they come in.
|
|
